The self-locking motor shaft ensures that the gate is locked in any position, so an additional electric lock is not required in most cases.
300 Mobile numbers
The use of high quality components such as the stainless thrust tube or the anodized aluminium housing make the operator largely maintenance-free.
Integrated limit switches
The SLIM CLR operator is supplied with two non-contact and therefore wear-free limit switches. These are hidden on the bottom of the operator and can be easily adjusted or locked without tools.
Comfortable emergency release
The operators are equipped with an unlocking mechanism that enables the gate to be opened and closed by hand in the event of a power failure. A ring on the thrust tube ensures a positive power transmission and always the correct position after the emergency release.
lean silhouette
Thanks to the slim design of the operator, your gate comes into its own.
Standard softstop
In combination with the ST 12/5 control unit, the operator stops in both directions at a reduced speed. In addition to a safe and harmonious gate movement, the entire mechanics of the gate and operator are also protected.
Automatisches Reversiersystem ARS
The 12V technology enables the use of the ARS function. If the door encounters an obstacle, the operator stops and immediately reverses the direction of rotation. The highest level of security. Of course, the SLIM CLR meets the standard according to EN 13241-1.
12V technology
An energy-saving, smooth-running DC motor ensures a low-vibration and harmonious gate travel.
Control unit ST 12/5
Large, illuminated LC-Display (2 x 16 characters)
Clear text menu programmable through 4 buttons
Slot for pluggable radio receiver
Direct connection of 8,2 kΩ safety sensing edges
separated (inside/outside)
Clear text menu programmable via four buttons in 8 languages: English, German, Spanish, French, Italian, Dutch, Czech, Polish
Save energy! When in standby mode the intelligent control switches off unused devices and thus achieves an extremely low power consumption of only 1 Watt in standby mode! This saves valuable energy.
A high-resolution sensor monitors engine speed and power for maximum safety and comfort.
Initial test under EN 13241-1 of TÜV-Süd taking as basis EN 12453 and EN 12445.