PULL T - tousek

PULL T

Previous slide

Next slide

Features / Advantages

Gearing made of tempered steel

The heart of the PULL T is the extremly robust full metal gearbox. In addition, we only use high-performance branded oil to ensure optimal lubrication even at low temperatures and high use. The result: increased reliability and an even longer service life.

One-piece die-cast aluminium housing

Consits entirely of corrosion-resistant and high-strength aluminium. Since this housing was made in one piece, the torsion and bending strenght could be increased significantly. This enables the long-term trouble-free movement of door weights up to 1.500kg.

Comfortable intuitive emergency release

Every PULL T is supplied with a profile half cylinder and three keys as standard, so that the emergency release lock can be integrated into an existing locking system.

Software GSM 801

Unique: the externally readable and removable display. The big advantage: A look at the status display with clear text menu navigation is enough, and you know about all processes and changes. Available in 8 languages.

Standard softstop

The operator stops in both directions at a reduced speed. In addition to a safe and harmonious gate movement, the entire mechanics of the gate and operator are protected aswell.

Encoder with active torque control

The PULL T´s speed encoder receives incredible 6.200 signals per second! In this way, the PULL T can actively control the force required in each case. This means that there are sufficent strength reserves in every situation. Subsequent seasonal adjustments are not necessary.

Pinpoint: technology without limit switches

All models learn the end positions independently during the installation. In addition, you can fine-tune these learned positions and adapt them to your own requirements. Conventional mechanical limit switches, which can freeze during winter, are no longer necessary.

The big advantage: speed

The powerful 24V motor of the PULL T24 speed achieves an opening and closing speed of 16m/min. It opens a standard entrence with of 3m in approx. 11 seconds.

Control unit

Control unit PULL T

Large, illuminated LC-Display (2 x 16 characters)
Clear text menu programmable through 4 buttons
Downloadable memory of the last 800 cycles
Selectable operating modes (impulse, automatic, deadman)
Slot for pluggable radio receiver
Direct connection of 8,2kΩ safety sensing edges seperated for main and side edge
Status display for safety and impulse inputs
Self-monitoring of the photocell
Adjustable soft stop (distance and speed)
Optional PULL T8 with directional traffic light control
Optional master-slave operation with PULL T8 + T10 + T15

Technical data

Gate weight	400kg
Speed	17,5m/min
Duty cycle	40%-60% S3
Power supply	230V AC, 50Hz
Torque	20Nm
Max. drive distance	30m

	PULL T5	PULL T8
Gate weight	500kg	800kg
Speed	11m/min	11m/min
Duty cycle	Private area	40% S3
Power supply	230V AC, 50Hz	230V AC, 50Hz
Torque	20Nm	25Nm
Max. drive distance	30m	30m

	PULL T10	PULL T15
Gate weight	1000kg	1500kg
Speed	9m/min	9m/min
Duty cycle	40% – 60% S3	60% S3
Power supply	230V AC, 50Hz	230V AC, 50Hz
Torque	25Nm	30Nm
Max. drive distance	30m	30m

	PULL T24	PULL T24speed
Gate weight	600kg	400kg
Speed	13m/min	16m/min
Duty cycle	40% – 80% S3	40% – 80% S3
Power supply	24V DC	24V DC
Torque	20Nm	20Nm
Max. drive distance	30m	30m