English

PULLT Technical data

Description

PULL T5

PULL T8

PULL T10

PULL T15

Gate weight
500kg800kg1000kg1500kg
Max. gate travel30m30m30m30m
Duty cycle
20 cycles/dayup to 40%up to 60%up to 60%
Speed11m/min.11m/min.9m/min.9m/min.
Torque20Nm25Nm25Nm30Nm
Mains voltage230V±10%230V±10%230V±10%230V±10%
Motors voltage230V230V230V230V
Power consumption
1,3A1,3A1,6A1,6A
Protection class
IP 44IP 44IP 44IP 44
Standby-mode1,1W1,1W1,1W1,1W
GearwheelZ20 module 4Z20 module 4Z16 module 4Z16 module 4
Initial test made by TÜV*500kg800kg600kg600kg
Dimensions
(W x H x D)
316 x 307 x 207 mm 316 x 307 x 207 mm 316 x 307 x 207 mm 316 x 307 x 207 mm 

 

Description

PULL T24

PULL T24speed

  
Gate weight
600kg400kg  
Max. gate travel30m30m  
Duty cycle
up to 80%up to 80%  
Speed13m/min.16m/min.  
Torque20Nm20Nm  
Mains voltage230V±10%230V±10%  
Motors voltage24V DC24V DC  
Power consumption
1,0A1,0A  
Protection class
IP 44IP 44  
Standby-mode0,8 W0,8 W  
GearwheelZ16 module 4Z20 module 4  
Initial test made by TÜV*350kg250kg  
Dimensions
(W x H x D)
316 x 307 x 207 mm 316 x 307 x 207 mm   

 

*Initial test in compliance with EN 13241-1 by TÜV-Süd taking as a basis EN 12453 and EN 12445.
An active safety sensing edge is not necessary for gate weights up to the given values. A passive rubber safety
edge at the main closing edge is sufficient.

 

tousek Ges.m.b.H. - Zetschegasse 1, A-1230 Wien
Tel: +43 (1) 6673601-0 I Fax: +43 (1) 6678923   E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Are you interested in our products?
We gladly advise you!


Phone: 01 / 667 36 01
E-Mail: info@tousek.at

Catalogue selection

Pull T
LWA
LWS
GTZ
TT
SLIM
SWING X
TURN SERIE
SWING SERIE
TURN 310 UF
SPIN
PASS
LIFT X
FUNK
General brochure
Leaflet

Please enter your personal information

back