The powerful 3-phase motor of the TPS 40 PRO achieves an opening and closing speed of rapid 17,5m/min. At the same time, it effortlessly moves gates which weight up to 4 tons

The powerful motor and the robust full metal gearbox are designed for continuous operation without cooling phases. For the operator of the system, this means reliable access security 24 hours a day, 7 days a week

Using an innovative angle measurement, a high-precision absolute encoder determines the current position of the gate system to the exact mm. The positioning of the end positions has never been so easy and all learning trips after unlocking or power failure are eliminated. The conventional mechanical limit switches, which can freeze in winter, are also superfluous. Typical tousek!

An electro-mechanical brake reliably locks the gate. The emergency release sits protected by a profile half cylinder behind an easily accessible flap. This means that locking the emergency release can be integrated into an existing locking system as standard

The TPS 40 PRO stops and accelerates in both directions at a reduced speed. In addition to a safe and harmonious gate movement, the entire mechanics of the gate and operator are also protected

Separately adjustable for open and closed directions, the speed can be adjusted to any gate situation and according to the wishes of the operator. The speed is controlled by an efficient frequency converter

The entire motor-gear unit can be easily adjusted in height and thus adapted to almost any gate, whether self-supporting or floor-guided. Of course, the intrusion protection of the module 6 gear racks automatically moves with it

The entire mechanism is housed in a generously dimensioned housing. This creates enough space for additional installations and accessories. In addition, the control board and the frequency converter are located in a large steel cabinet with factory-installed top-hat rails for further installations. The photocell can also be installed in the housing, protected against vandalism