TURN 310 – tousek

TURN 310 UF

Previous slide

Next slide

Features / Advantages

Self-locking gear

The robust self-locking gear ensures that the gate is locked in any position. Depending on the installation situation, the electric lock can be omitted

Integrated stops for simplified installation

Adjustable mechanical stops for the gate open and gate closed positions are integrated as standard. This means that you run the gate without the annoying trip hazards in the gate area in most cases

Standard softstop

In combination with the ST 51 control unit, the operator stops in both directions at a reduced speed. In addition to a safe and harmonious gate movement, the entire mechanics of the gate and operator are also protected

Emergency release

The TURN 310 UF operator reliably locks the gate. This locking mechanism can be easily released in the event of an emergency, allowing the gate to be opened and closed by hand in the event of a power failure

Control unit

ST 51

Large, illuminated LC-Display (2 x 16 characters)
Clear text menu programmable through 4 buttons
Slot for pluggable radio receiver
Direct connection of 8,2kΩ safety sensing edges seperated for main and side edge
Status display for safety and impulse inputs
Self-monitoring of the photocell
Adjustable soft stop
Selectable operating modes (impulse, automatic, deadman)
Adjustable partial opening for pedestrians also
with single leaf operation
Partial opening controllable via radio
Downloadable memory of the last 800 cycles

ST 61

• Large, illuminated LC-Display (2 x 16 characters)

• Clear text menu programmable through 4 buttons

• Selectable operating modes (impulse, automatic, deadman)

• Downloadable memory of the last 800 cycles

• Speed encoder input

• Adjustable soft-stop and soft-start

• Slot for pluggable radio receiver

• Direct connection of 8,2 kΩ safety sensing edges
separated (inside/outside)

• Status display for safety and impulse inputs

• Self-monitoring of the photocell

Technical data


Gate weight	400kg
Max. leaf width	3m
Opening speed	6°/s
Duty cycle	30%
Power supply	230V
Thrust / Torque	300Nm
Max. opening angle	110°

Scope of delivery

Kit includes

2 Antriebe inkl. Montagenmaterial
1 Control unit ST 51
1 Receiver RS 868 2-channel
2 Transmitters RS 868-4M, 4-channel
1 pair photocells LS180
1 Detailed installation manual

Kit includes

2 Antriebe inkl. Montagenmaterial
1 Control unit ST 61
2 Sensoren für TURN 310 UF
1 Receiver RS 868 2-channel
2 Transmitters RS 868-4M, 4-channel
1 pair photocells LS180
1 Detailed installation manual